Königs carnival boots prince guard / guard of honor custom build / measurement

Multiple selection possible! Please select first the type (rubber, welted or double stitched) and then the color.

Multiple selection possible. The short elastic insert is recommended for boots without zipper, where the shaft end should be narrower than the calf circumference - 2cm, so that you can still get through the top with the calf.

Multiple selection possible! The different types of lining can stiffen the outside (calfskin lining) or make it softer on the inner side of the shaft for better contact with the horse (nappa lining). When you coose lambskin lining, it is advisable to choose only the outside of the shaft and the foot, otherwise you will lose contact with the horse on the inside of the shaft. (Please enter in the comment box where you should find which lining)

At Königs there is the possibility to stiffen the shaft through the different types of lining or to provide it with an additional external stiffening. The upper stiffness is just a little bit harder than the normal leather, the Sir stiffness is very hard. In dressage boots, the stiffness is desired for a quiet position of the leg or that the shaft retains its shape.

Please state the color of the initials and the letters themselves under "Order notes".

Please write down any comments on your order (which color where, wich swarovski color or special wishes).

Here you can upload pictures that we need for your order.

Please look at the video and check if you need a part measurement. The measurement table is on the next side.

Please click to open the picture. The bold measure in the tables corresponds to the measurement at the backstrap without heel. At Königs boots, the height incl. the dressage bow is written in the shaft.

The shaft sizes HS and HE are manufactured in a narrower last.

The little part measurement makes sense with small differences regarding to the measurement table. The standard circumference at the bootleg end amount is calf circumference - 2cm. For a 38cm calf, the bootleg end would be 36cm, please check if 2 fingers would fit into the tape measure, otherwise it may happen that the bootleg end is too wide or too tight.

Write down your measurements if you have chosen the extra price for shaft part measurement. If you have different sizes on the right or left leg please write down: (right/left).

Write down your measurements if you have chosen the extra price for full measurement. If you have different sizes on the right or left leg please write down: (right/left).