Königs Palermo dressage riding boot with zip custom build / measurement

Multiple selection possible! Please select first the type (rubber, welted or double stitched) and then the color.

Multiple selection possible. The short elastic insert is recommended for boots without zipper, where the shaft end should be narrower than the calf circumference - 2cm, so that you can still get through the top with the calf.

Multiple selection possible! The different types of lining can stiffen the outside (calfskin lining) or make it softer on the inner side of the shaft for better contact with the horse (nappa lining). When you coose lambskin lining, it is advisable to choose only the outside of the shaft and the foot, otherwise you will lose contact with the horse on the inside of the shaft. (Please enter in the comment box where you should find which lining)

At Königs there is the possibility to stiffen the shaft through the different types of lining or to provide it with an additional external stiffening. The upper stiffness is just a little bit harder than the normal leather, the Sir stiffness is very hard. In dressage boots, the stiffness is desired for a quiet position of the leg or that the shaft retains its shape.

Other colors or forms are available on request.

Attention: Not all colors are possible in all applications, please check first whether (white), (colored) or nothing stands behind the application. For "(colored)" please enter the correct color in the comment field further down, here all Swarovski colors can be selected.

Please state the color of the initials and the letters themselves under "Order notes".

Other forms possible on request.

Please choose the extra price for the border and cuff first (one step before). You can write down at the end of the order which color you want on which part.

Please write down any comments on your order (which color where, wich swarovski color or special wishes).

Here you can upload pictures that we need for your order.

Please look at the video and check if you need a part measurement. The measurement table is on the next side.

Please click to open the picture. The bold measure in the tables corresponds to the measurement at the backstrap without heel. At Königs boots, the height incl. the dressage bow is written in the shaft.

The shaft sizes HS and HE are manufactured in a narrower last.

The little part measurement makes sense with small differences regarding to the measurement table. The standard circumference at the bootleg end amount is calf circumference - 2cm. For a 38cm calf, the bootleg end would be 36cm, please check if 2 fingers would fit into the tape measure, otherwise it may happen that the bootleg end is too wide or too tight.

Write down your measurements if you have chosen the extra price for shaft part measurement. If you have different sizes on the right or left leg please write down: (right/left).

Write down your measurements if you have chosen the extra price for full measurement. If you have different sizes on the right or left leg please write down: (right/left).

The dressage bow height can only be chosen free if you have selected the surcharge for the part measurement or full measurement. At Königs the dressage bow is optically 2cm shorter, than with other manufacturers.

Please write down your body height in cm in the field below, this will help us to see if you pick the right shaft height.

Now that you have entered all the required values for this boot, the "Apply configuration" button appears below. Please do not forget to put the boot in the shopping cart afterwards.