DeNiro S0011/S0012 riding boots (configurator)

you can choose one or more options.

Please enter your comments on the order (which color where, which stitch color or special wishes).

Please look at the video and check if you need a part measurement. The measurement table is on the next side.

Please click on picture to enlarge. The first value in the table is the height at the backstrap without heel, the second value is the calf amount/circumference with breeches and socks.

DeNiro boots drop 1cm in use due to the narrow cut in the ankle, please open this to the measured height from the floor to the hollow of the knee when standing. Please do not take the height from old boots from other manufacturers, they measure the height differently, otherwise the new boot would be much too high. If you already have a boot that fits the height, you can pull it out by the back strap without a heel and measure it. This corresponds to the ordered DeNiro height.

The standard circumference at the end of the shaft is calf circumference - 2cm. With a 38 calf, the shaft end would be 36 cm, please check it, otherwise the boot will be too wide at the top! If the value is smaller, please order a custom-made product.

Please write down your body height in cm in the field below, this will help us to see if you pick the right shaft height.

Now that you have entered all the required values for this boot, the "Apply configuration" button appears below. Please do not forget to put the boot in the shopping cart afterwards.