Cavallo Insignis slim dressage boot (configurator)

Anfertigung
Anpassung
Cavallo Insignis slim dressage boot (configurator)
Cavallo Insignis slim dressage boot (configurator)
Cavallo Insignis slim dressage boot (configurator)
Cavallo Insignis slim dressage boot (configurator)
Cavallo Insignis slim dressage boot (configurator)
Cavallo Insignis slim dressage boot (configurator)
Cavallo Insignis slim dressage boot (configurator)
€549.00 *

Prices incl. VAT plus shipping costs

Delivery time ca. 25 Workdays

Cavallo Insignis configurator
basic color ** 
reset
bow 
The color of the border / cuff can be specified later in the "color selection". 
reset
rhinestones 
The color of the border / cuff can be specified later in the "color selection". 
Example: cuff silhouette patent diamonds can be made in all patent colors (black, mocca, blue and anthracite), brushcalf bows in all brushcalf colors, etc.
reset
sole ** 
reset
extra option 
reset
extra color 

Here you can choose the color of the just selected borders and cuffs. In the next step, there is an annotation box where you can assign the colors to the places.

reset
comments on your order 

Please write down any comments on your order (which color where or special wishes).

reset
picture upload 

Here you can upload pictures that we need for your order.

An error occured while uploading the file

File(s) are uploading.

You're trying to upload too many files

A file you want to upload is too big - only 3.00 MB is allowed

File names can't be used multiple times

The MIME file type is not supported

Your files were added successfully

(maximum 5 files per 3.00 MB is allowed)
reset
 

Please look at the video and check if you need a part measurement. The measurement table is on the next side.

reset
 

Attention: Cavallo boots are 2cm shorter (measured on the back strap without heel) and drop around 1-2cm in use. So please order at least a 3cm higher shaft height than measured from the ground to the hollow of the knee (when standing).

Please click to enlarge the measurement table.

MasstabelleNSQi1ij6B2ywp

reset
UK shoe size ** 
reset
last size ** 

Depending on the model, Cavallo offers up to 7 different lasts. Typically, most stores use only the normal last, which is far too wide for most customers. That's why we offer you the option of having your boots adjusted even better in your foot, and at no extra cost. For this we need your heel- instep- and ball amount, which you please enter in the fields below. We will then find the right last for you.

last-sizes-new

reset
ABC measurements ** 

For boots with zipper on the back or polo models, Cavallo offers the possibility to cut also standard boots without extra price tight in the under calf area. For this there are the so-called ABC dimensions. The circumference 25cm above the ground, 20cm above the ground and 15cm above the ground. Please enter these dimensions in the box below. This dimension is also without surcharge.

abc-englisch

reset
Cavallo shaft height 

Here you can enter the desired shaft height. Please look carefully, if your values ​​can still be found in the size chart in combination with the shoe size. If you need other dimensions, you can order a custom made boot in the next steps. Attention: Cavallo boots are 2cm shorter (measured on the back strap without heel) and drop around 1-2cm in use. So please order at least a 3cm higher shaft height than measured from the ground to the hollow of the knee (when standing).

reset
Cavallo calf amount 
Here you can enter the desired calf circumference. Please look carefully, if your values ​​can still be found in the size chart in combination with the shoe size. If you need other dimensions, you can order a custom made boot in the next steps. The calf amount is normal at Cavallo. If you are between the values, then please order dressage boots without elastic insert with the larger calf amount, for show jumping bootws with elastic insert you can take the smaller calf amount.
reset
little part measurement 

The little part measurement makes sense with small differences regarding to the measurement table. The standard circumference in the bootleg end amount is calf circumference - 2cm. For a 38cm calf, the bootleg end would be 36cm, please check if 2 fingers would fit into the tape measure, otherwise it may happen that the bootleg end is too wide or too tight.

reset
made to measure boot? ** 

 

reset
values shaft part measurement 

Write down your measurements if you have chosen the extra price for shaft part measurement. If you have different sizes on the left or right leg please write down: (left/right).

Cavallo-Schaft-Teilmass-englisch

reset
values foot part measurement 

The foot part measurement is useful at very high instep or heel circumference, or very narrow feet. If you are not sure if you need it, please ask us first.

fussteilmass-englisch

reset
values full measurement 

Write down your measurements if you have chosen the extra price for full measurement. If you have different sizes on the left or right leg please write down: (left/right).

Cavallo-Vollmass-englisch

reset
body height (cm) ** 

Please write down your body height in cm in the field below, this will help us to see if you pick the right shaft height.

Now that you have entered all the required values for this boot, the "Apply configuration" button appears below. Please do not forget to put the boot in the shopping cart afterwards.

reset
** Required field
You also may finance this product Information about possible rates
  • C-187211
Cavallo Insignis slim dressage boot (configurator). New! Very tight fit around the ankle, no... more
Product information "Cavallo Insignis slim dressage boot (configurator)"

Cavallo Insignis slim dressage boot (configurator).

New! Very tight fit around the ankle, no loose dressage boots anymore!

Very tight Dressage riding boot with soft shaft inside chisel toe form, very high 7cm dressage bow made of full grained cow skin and hard shaft outside. Ago-glued rubber sole with comfort insole. Front inside zip to the joint (with press button) permits a very very slim ankle area.

The drop of this boot is max. 1cm. If you wish a boot, that is not too short after running in take a 3cm higher shaft height than you have measured from the hollow of the knee to the ground (see our measurement description).

Related links to "Cavallo Insignis slim dressage boot (configurator)"
Information zum Widerrufsrecht bei diesem Artikel: Beim Reiten ist es überaus wichtig, dass... mehr

Information zum Widerrufsrecht bei diesem Artikel: Beim Reiten ist es überaus wichtig, dass die Stiefel/Chaps auch perfekt passen. Deshalb können Sie bei uns auch individuelle Sonder- und Maßanfertigungen bestellen. Hierbei gibt es jedoch kein 14-tägiges Widerrufsrecht, denn das Gesetz sieht dieses bei Verträgen zur Lieferung von Waren, die nicht vorgefertigt sind und für deren Herstellung eine individuelle Auswahl oder Bestimmung durch den Verbraucher maßgeblich ist oder die eindeutig auf die persönlichen Bedürfnisse des Verbrauchers zugeschnitten sind, nicht vor. Als besonderen Service bieten wir Ihnen jedoch: Passt das erste Stiefelpaar/Chapspaar nicht und Sie senden uns die Ware binnen 4 Wochen zurück, modifizieren wir das vorhandene Stiefelpaar/Chapspaar, sodass es passt. Wenn dies nicht möglich ist, fertigen wir einmalig ein weiteres für Sie an. Achtung: Bei Abweichungen vom Tabellenmaß können zusätzliche Kosten entstehen, über die wir Sie im Vorfeld informieren (dieser Service ist zusätzlich zu Ihren gesetzlichen Verbraucherrechten auf Gewährleistung einer mangelfreien Beschaffenheit der Kaufsache, welche unabhängig davon bestehen bleiben und durch den Service nicht eingeschränkt werden).

Modellerklärung Insignis Modell Insignis : In robustem Rindboxleder Modell Insignis Slim... mehr

Modellerklärung Insignis


Modell Insignis: In robustem Rindboxleder
Modell Insignis Slim: Enger im Knöchel als Modell Insignis (für schmale Waden)
Modell Insignis Lux: Mit Haftleder in glänzendem Brushcalfleder
Modell Insignis Lux Slim: Enger im Knöchel als Modell Insignis Lux (für schmale Waden)
Modell Insignis Lyra: Mit Lyra Lochung am Bogen oder an der Zehenkappe (im Konfigurator mit integriert)
Modell SE: Ohne Haftleder (im Konfigurator mit integriert)
Modell Insignis Comfort: Mit Reißverschluss hinten anstatt vorne innen für eine noch engere Passform (Springstiefelschnitt)

Read, write and discuss reviews... more
Customer evaluation for "Cavallo Insignis slim dressage boot (configurator)"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Anfertigung
Anpassung
100+ Bestseller
Anfertigung
1x Umtausch
-40
Anfertigung
1x Umtausch
Anfertigung
1x Umtausch
100+ Bestseller
Anfertigung
1x Umtausch
Anfertigung
Anpassung
Anfertigung
Anpassung
100+ Bestseller
Anfertigung
1x Umtausch
Anfertigung
Anpassung
Anfertigung
Anpassung
-30
-35
Viewed